This guide is for SM V3 [August 2022 - Present]. For the previous version [prior to August 2022] please refer to the guide below:

Servicing and Assembling Nodes [SM v2 and earlier - prior to July 2022]

<aside> ⚠️ Please be aware the new version of the Smart Mooring has a different tightening convention (right-hand-tight v left-hand-tight) than the previous version. Threading incorrectly can permanently damage Smart Mooring components.

</aside>

Intro

When re-configuring or repairing a Spotter + Smart Mooring it will be necessary to clean, disconnect, prepare, reconnect and test the electrical and mechanical connection points on the system. This guide will show you how to do this step-by-step for Spotter v3 and Smart Mooring version 2.

Smart Mooring Components

Tools/Consumables Needed

• 4mm, 5mm and 6mm hex wrench (provided in accessory box)
• 90% or higher Isopropyl Alcohol or other residue-free cleaning agent
• Pliers or cutting tool
• Cotton swabs
• Marine grade dielectric grease
• Spare Bristlemouth connectors

Bio-fouling cleaning

Before beginning, clean up as much bio-fouling as possible. Using a stiff brush or toothbrush with a mild bleach solution will work for smaller and more sensitive areas. Clean with freshwater afterwards.

For larger areas a pressure washer can also work.

Cleaner surfaces will be more resistant to accumulating new growth.

You can read more on bio-fouling here here:

What is Biofouling and How Can We Stop It?