Updating your Spotter’s firmware version

To update your Spotter’s firmware review the chart below describing the various options based on the current Spotter model and installed firmware:

Firmware Update Options

Model Firmware Over-the-Air SD Card + Console USB Installer
Cellular Spotter 2.2.x and Up ✓ ✓ ✓
Satellite Spotter 2.2.x and Up ✓ ✓
Satellite Spotter 2.0.0 - 2.1.x [1]
Legacy Spotter 1.12 and Below [2]

Over-the-air (OTA)

V3 Cellular Spotters can now update their firmware over-the-air, allowing you to remotely update your deployed device. To initiate an over-the-air firmware update please email us at ***[email protected].***

SD Card + Console

A firmware update can be applied by placing it on the SD card. Further information on this feature is coming soon.

USB Installer - V3 Spotters

Any Spotter having a SPOT ID of SPOT-30XXXX or above (e.g. SPOT-30123R, SPOT-30124C…)

macOS installer use:

Instructions for Macs:

  1. Using Homebrew, install dfu-util:
    1. Install Homebrew, if you haven’t already
    2. In Terminal, run the following: brew install dfu-util
  2. Download and unzip the installer package